Quantcast
Channel: Auto-Professionals - VAG Group (VW - Audi - Seat - Skoda - Bentley)
Viewing all articles
Browse latest Browse all 305

Skoda Fabia 2012 1.2 TDi CR Engine Stalling Issue

$
0
0
Hi Guys,

Maybe someone banged his head on this before.
Car is a Skoda Fabia 2012, 1.2 TDI CR with 3 pistons.
ECU Delphi DCM 3.7
Part No SW: 03P 906 021 AN HW: 03P 906 021 AN
Component: R3 1.2 DCM3.7 H09
SW Version : 9980

Problem: Car is stalling, giving error on Camshaft sensor.
Changed sensor. No more sensor error.

New Problem: Error on Injector one.
Changed Injector.
Problem remains but sporadic.

Car will not rev up, will only rev 1000-1500 rpm then die.
If I disconnect the N75 and try to rev it right after start it will rev up to 3000 rpm and round, but then runs in default mode.

Downgraded software to 5887, thinking Diesel Gate problem.
New problem appears: 15536 - EGR Sensor 1 & P0405 00 [039] - Signal too Low
Made EGR OFF.
Now RPM goes up to 3000 rpm and when reaching 3000 rpm will start fluctuating between 2500-3000 rpm.
When COLD, car runs like nothing wrong in the world, as soon as it gets a bit warm AND you stop at a cross road... dies and will not rev up.
Sometimes and only sometimes, will give error again on injector 1.
Checked wiring, all ok.
ECU changed, ok
One thing I noticed when logging sensors, the CAMSHAFT sensor (that we changed and is new), when car idle will always fluctuate between 800-1400 rpm when at idle.
When flowered at 3000 rpm will fluctuate between 3-5800 rpm.
Can I have still a bad camshaft sensor or what the heck is the problem?

Thanks.

Viewing all articles
Browse latest Browse all 305

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>