Hi all,
I have an Octavia II with CAYC engine and NTT (DSG) transmission that will not crank.
There are no fault codes.
If I power the J682 relay (starter relay terminal 50) the engine cranks but doesn't start.
P/N test in transmission is OK.
If I run the J519 (central electrics module) terminal 50 test in GFF I only get two of the values to change to ON.
The CAN out Terminal 50 always reads off.
Terminal 75 test does the same.
Terminal 15 and 30 both test correct.
Any ideas welcome.
Thanks.
I have an Octavia II with CAYC engine and NTT (DSG) transmission that will not crank.
There are no fault codes.
If I power the J682 relay (starter relay terminal 50) the engine cranks but doesn't start.
P/N test in transmission is OK.
If I run the J519 (central electrics module) terminal 50 test in GFF I only get two of the values to change to ON.
The CAN out Terminal 50 always reads off.
Terminal 75 test does the same.
Terminal 15 and 30 both test correct.
Any ideas welcome.
Thanks.
| IMG_20190930_121111.jpg.pdf | ||
| File Type: |
 |
 |
| Downloaded: | 2 times | |
| Size: | 4.49 MB | |